Quote:
Originally Posted by david s poole
now that you have fixed the air leaks the engine is pulling harder on the plate and the mixture is probably too rich.try backing off on the 3mm at the fuel distributor but do so in small increments.[somebody adjusted it previously to cover the problem of the leaks].
|
David, Once again thank you for the fix. Adjusting the mixture has made no difference, leaner it stumbles and same with richer. Tried adjusting the linkage to mechanically increase revs, however that just seemed to make the gear change harsher with no measurable rev increase at idle. Will try and hunt down someone in Brisbane that knows these and see if I can get it fixed that way. Oh for an early Holden with a single barrel solex!