View Single Post
  #4  
Old 03-06-2007, 10:06 PM
just-n-time's Avatar
just-n-time just-n-time is offline
Registered User
 
Join Date: Feb 2006
Location: Louisiana266 Maloy Rd winnfield71483
Posts: 804
Wink Start at basics

Quote:
Originally Posted by tomzim4 View Post
Hi, I just got it few weeks ago and just started to drive. It was purchased from Canada and has 290,000 Kil. on it. It was always dealer maintained since new and I purchased from original owner. He had just had the rotor replaced and all. The plugs ect also look new. Problem has just started recently.
You need to satisfy, your need to know what makes it tick,you know the plugs are good ,the rotor is good,the cap is good the next item is the wires(plug)?Check them with ohm meter and wind one that has to much resistance.If this is OK then move on to what can make it not pull?try to look into the on off ratio get the fuel balance set and the o2 sensor it may be telling the eha that the condition is far to rich if so you will not get the fuel needed to make it perform.one of the least wished for is the old catalytic converter being plugged.But look first to these other things it will keep you occupied for a while.JNT
Reply With Quote