Quote:
Originally Posted by smokindabandit
well, wasn't too sure about the specifics, but i kinda figured i'd be eating some more cash on repairs... so would it be cheaper for a rebuild or a replace?... btw how hard is it to get to the starter?
|
Here's how I replace a starter in a '93 190E 2.3
I purchased a rebuilt Bosch starter at Autozone for $110, lifetime warranty...we'll see how long it lasts!
1) Remove negative battery cable
2) Leave key in ignition so steering can be turned to remove starter
3) Jack up front of car
4) Remove left front wheel
5) Turn steering wheel to far right
6) Remove cover/shield from under engine
7) Remove wiring from starter
8) Remove lower starter bolt
9) Remove upper starter bolt (this took longer to do since it was tight and in a tight space).
10) Remove starter by gently turning, twisting, and pulling out. It's tight, but it will come out without removing any other components. *NOTE* You will have to move the steering slightly to allow clearance to remove starter and re-installl starter.