Just getting tired of it. It always start on the second try, but rough with vac. gauge in the red. I searched many thread re vac. leak, which I believe it to be but could not find any.

After reaching normal temp. vac. gauge rises a bit, but not totally to the left and idling is better but not smooth.

What I've done so far:

1. cap and rotor replacement quite recent.

2. replaced fuel filter, accumulator, and check valves, very recent.

3. replaced air filter, spark plugs H9DC, very recent.

4. air / fuel ratio is in the 50's.

5. sprayed propane gas to all connections, in the hunt for vacuum leaks.

6. ICV sprayed clean.

Hot starts are 100 %. Warm starts and 50 /50.

This is my daughter's and wife's transport, so I just wanted to make it right.

Thanks for any inputs.

__________________
joel

Prayers bring forth enlightenment.