Quote:
Originally Posted by joel
...As in the foto, I got both the green double pin sensor and the single black sensor infront of it. Could you ID these, pls. and how to know if they are in good working condition. Thanks again.
|
From the bottom...
(black 1 pin = coolant temp to coolant temp gage)
...this is not the sensor you are looking for...
test-
Courtesy ~Arthur Dalton
OHM 110 = 60C
67 = 80C
38 = 100C
(green 2 pin = coolant temp to CIS)
test-
Ohm's range from the temp chart in the /Engine Manual-Combustion Manual-07.3 Mechanical/electronic gasoline injection system (KE injection)-121 Testing electrical components of KE injection system. page 60
Temperature °C........Resistance k?
-20........................15.7
-10.........................9.2
0............................5.9
10...........................3.7
20...........................2.5
30...........................1.7
40...........................1.18
50...........................0.84
60...........................0.60
70...........................0.435
80...........................0.325
90...........................0.247
Same resistance values apply to KE intake air temp sensor.
I think this chart applies to these 2 sensors for all KE systems but don't know for sure.
__________________