|
Just did this last weekend with my 2000 C280. These are the numbers I used from the Haynes manual that covers 1993-2000 C180, C200,C220, C230, C250.
Brake wear pad sensor bolt, front Nm/ft.lb 30/22
Brake disc retaining screw 10/7
Caliper bolts to steering knuckle 115/85
Guide pin bolts 25/18
My change was a snap. Give your new rotors a good scrub with brake cleaner and fine steel wool. My rotors at 50m came off with no problem. I had to pound the rotors off my 300CE. One tip, leave inner pad on and use your caliper spreader against pad to push back piston. And monitor your brake fluid level when doing this.
glenmore
1991 300CE
2000 C280
1990 LS400
|