View Single Post
  #9  
Old 03-26-2007, 10:56 PM
Brian Carlton Brian Carlton is offline
Banned
 
Join Date: May 2002
Location: Blue Point, NY
Posts: 25,390
I retract my statements regarding a glow plug. It's not the issue at the stated point in time.

Additionally, I don't see how it can be a delivery valve if it's temperature related.

The possibility exists for a defective injector, but connecting the problem with temperature change is difficult. I would visualize the possibility of the higher temperature resulting in better atomization from a marginal injector. Apparently, the problem still exists at operating temperature........slightly.......since the nailing is still present.

What I would recommend.........immediately when the problem surfaces at the 2 minute point.........is to crack each injector in sequence and see if you can narrow it down to one cylinder. This won't be easy because the 603 will run rough on five cylinders but it won't miss if you take out the one with the problem.

If you find it, then you can swap injectors to see if the problem moves with the injector.
Reply With Quote