Justin

If you have that much junk there are a few things you can do to lessen the chance of reaccummulation after you have cleaned the lines. Take the crossover pipe and intake manifold off and clean both well. Disable the EGR, and run Mobil 1. Any of those steps will help reduce the amount of gunk that can get dumped into those lines. I took the ALDA off yesterday and adjusted it just a 1/4 turn and there is a noticeable difference. I am going to have at it again this weekend. I followd gsxr's instructions but I was not able to budge the nut with channel locks so ended up using an open end wrench. I also needed to loosen fuel lines 4, 5, and 6 from the injection pump. My car was dead slow off the line, especially when cold.

__________________
=-=-=-=-=
1987 300TD 231,000
#22, afterglow, plastic fan, euro lights, alternator upgrade, cluster housing update