Thread: Need 86-91 126 Used Power Steering Pump
View Single Post
  #9  
Old 04-02-2007, 01:26 AM
Bob Albrecht's Avatar
Bob Albrecht Bob Albrecht is offline
Registered User
  
Join Date: Mar 2005
Location: Kennett Square, PA
Posts: 344
That is a good article. I used it on the last one I rebuilt. I would add...
Quote:
Originally Posted by brewtoo View Post
Well, it's not too bad, I guess. Don't forget all the stories from people whose pumps never pumped again after they took them apart, though.

If it's the Vickers pump, perhaps this will help...

http://www.peachparts.com/shopforum/showthread.php?t=179718
On my 350SD you don't have to remove the fan or drain radiator fluid to replace the belt. A loose fan shroud is all that is required.

The pump is easy to rebuild, except the clip that holds the shaft from the back side is not easy to remove. It took two people and three screw drivers. On this next one I am going to put a rubber band around the vanes of the pump so they don't fall out and they go back where they came from.
__________________
1991 350SD (updated rods)
Biodiesel B100 when I can find it.
Dino when really cold outside
Reply With Quote