Quote:
Originally Posted by my123ca
Dont be surprised if you dont find one. Mine did not come with one. You will also need something to put the bearing in place. I think i used a 6" 1 1/4 pipe to put mine. It was somewhat crude. Others might have an idea to set the bearing. Mark the 4 flanges. They should be assembled exactly the same way you took them out. Use white paint.
|
Good point on the bearing. They got to be pushed in evenly I presume.
By flanges, are you referring to the back end of the driveshaft that connects to the flex disc?
BTW, I believe there is no need to remove the rear flex disc either, right?
__________________
the sooner you start... the sooner you'll get done  If it ain't broke, don't fix it.. Its always simpler to tell the truth... 
2007 Honda Accord EX
2007 Honda Accord SE V6
96 C220
97 Explorer - Found Another Home
2000 Honda Accord V6 - Found Another Home
85 300D - Found Another Home
84 300D - Found Another Home
80 300TD - Found Another Home
Previous cars:
96 Caravan
87 Camry
84 Cressida
82 Vanagon
80 Fiesta
78 Nova
Ford Cortina
Opel Kadet
68 Kombi
Contessa
|