Quote:
Originally Posted by tobybul
The other thing I found was the left uca bj boot had a tear so I'll order a boot from the dealer tomorrow. They seem to be the only place I know as a source just for a uca boot.
I probably won't bother with the AZ press tool next time. Its ok for pressing in but still a bit touch n go. It still requires a lot of effort if you are not set up with a large vise.
|
You can kind of see what I did in the pic, The breaker bar is under the tire of the car on one end, the other end is between the spindle and the C frame, then I used the tire iron and pole to press it in. The car was enough to hold it down
I did have to jump on the pole and bent the tire iron pressing it in though.
