Thanks. I measured the steel pipe at the aux coolant pump to be 0.720" which is 18 mm. I assume the nipple on the engine is also 18 mm. A brass Pex tee from Lowes is 0.665" which is 16.9 mm. I am going to use the Pex tee and 5/8 hose to tee into the coolant system for my vegi conversion. Do you think I'll have trouble getting 5/8 hose onto the pipes and nipples?
Quote:
Originally Posted by WD8CDH
Its about 16 or 17mm, closer to 5/8" rather than 3/4".
|
__________________
85 300D turbo pristine w 157k when purchased 167,870 July 2025
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked
|