Instead of the "Sachs Comfort Struts/Shocks (Pair) $235.46" I would go for the Bilstein HD (Heavy Duty) shocks. Much better.

Additonally I would also budget for inside and out wheel bearings. Use the latest silicone paste. Be sure to re-check after only a few miles of driving on them.

Sway bar bushings- you should be buying four: two for the bar and 2 for each of the connections to the lower A arm.

Regarding the Tie Rod Assemblys, your prices are quite good. Be sure the ones you are getting have an allen key recess in the ends. The cheapos don't and can be very hard to hold/tighten/install once they start spinning.

Check the motor mounts while you are there. If there is less than roughly an inch between the oil pan and the cross brace, these should be done as well.

The upper shock mounts really do deliver a nice ride quality difference.

Been there, done them.

Enjoy your results!

Haasman

__________________
'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)