[QUOTE=pberku;1505443]The charge is not full, I do have bubbles, but its cooling pretty well.

1) I am assuming that by the fact that I can get the fan (s) to work by jumping the output of the high pressure switch, that the the rest of the related ancillary circuits, fuses, relays ect.. are all ok.
That is correct . That is the circuit intergrity test, minus the pressure sw.
[ which may or may not be bad ...VERY FEW are bad]

2) Turning the AC on, and If I don't switch the fans on mannualy, and touch the AC metal pipes going to the condensor, they become way too hot to hold.
Normal, but that is an indication of good head pressure ..the tubes you are interested in are the end tubes and heat across the full condenser .

3) I don't really know what my high preasure readings are, ans the last thing that I want to do is reconect anything to the High preasure Schrader valve.

What do you think I should do? Still think that the switch could be OK? Do those switches break often?
See above.

If you have a lot of eyesight bubbles , you are not fully charged.

You did not mention an important factor ...ambient temps