Got her running without stalling!!!
Here's what I've done to get the car running,
1) Replaced some of the hardened rubber hoses going to the air cleaner and ICV.
2) Cleaned and tested the ICV
3) Inspected OVP
4) Checked and replaced O2 Sensor Bosch 13953 (cut and splice fits Fords
5) Checked Timing chain stretch - none noted
6) Removed #4 spark plug that was cross threaded and gapped about 80/1000's
7) Ran a thread chaser (Napa, the one at advance auto was stubby and wouldn't fit in the spark plug cavity)
8) Replaced all plugs, even though 3 of them were platinum "super duper" plugs - see thread 3/4's of a tune-up
9) replaced scotch tape on accelerator cable and installed the proper fitting
all this didn't fix the stall issue,,, but tweaking the fuel mixture screw did
