Quote:
Originally Posted by DogPollen
Well, I attempted to switch the lines as per the comments above, but being the novice that I am it was not apparent to me after attempting this how the lines could actually be switched. However, after putting the lines back on, I began pumping again and the secondary filter started filling. Now it's filled, but the primary one is still bone dry and it seems like i pump into oblivion, but nothing more happens. Thoughts?
|
Sounds like you successfully swapped out lines. NORMAL is upper steel line (near firewall) connected to, fat in the middle hose, return, lower intake goes to IP. Just swap rubber lines. And yes, per Bio... fill spin on with your choice of fuel, prior to installation, much less pumping involved.