Quote:
Originally Posted by PanzerSD
I can take my window regulator out in 20 minutes without removing the motor...
1 Remove the window from the carrier
2 Allow the window to go all the way down top the bottom of the door
3 Then remove the weatherstripping from the window frame,
4 Remove the screw at the top (you'll see it ) and the screw on the bottom of the front track
5 Lay the track down inside the door, and remove the regulator.
|
I bet I can take one out in 17 minutes including removing the motor.
Got you beat by 3 min.
Its not that difficult. Just did this on a 79 SD W116. Pulled all the regulators, cleaned and greased. Shimed the worm gear bushing on the RF motor, straightened the LR regulator. Found the RR motor MISSING!
No wonder it didn't work.
I could use a good '0 130 821 016' motor. Common with the W123 I believe.