Quote:
Originally Posted by scott19_68
Ask your mechanic if he had to temporarily remove the injector lines or not. This would provide some insight to those users on this board as to the possibility for a contamination inside the injector nozzle. Also - ask for more information as to which O-ring was replaced. I cannot think of any large O-ring except for maybe the one under the pre-filter but that should only take about 10 minutes to replace.
|
Yes - I will get more info today. I am pretty sure he did not remove anything that would require "a special tool", like the HP lines. He is an Audi mechanic, and we use for our A6. Since this was going to be "just an oil leak" we figured he could do it no problem. He did say if he had to remove the IP from the car he would need to get a special tool, so this make me think he just replaced this one silver dollar sized o-ring. #43 in the chart that was posted earlier... I think.