I checked for vacuum at idle and it shows about 18. I have the car running now but still not right. After doing more research, and playing with the mixture a little bit, the car starts and idles smooth. It drives pretty good but still feels sluggish. I replaced the plugs again and the cap and rotor only have about 3K miles on them. I'm not getting proper readings from pin #3 when i hook up the meter. When i hook up it shows about 50% and varies up and down as it should. But as the car idles the numbers steadily increase all the way up to 98.5% and stays there. It takes maybe 30 seconds to get there. What could cause this??

__________________
U. S. Air Force Air Traffic Controller
"U gotta keep 'em separated!!"