Sounds like the coolant temp sensor isn't sending the correct signal to the CIS control unit. If that was corking correctly then the current flow to the EHA would allow for a higher differential pressure & the engine would accelerate.

Measuring current flow to the EHA durning warm-up would show that problem.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator