Quote:
Originally Posted by Jeremy5848
I suppose I could even use my Mityvac, since it is the pressure/vacuum version. That would save buying a gauge and I could do it now.
[edit]
OK, there's boost. I ran a line from the Y-connector that no longer goes to ALDA into the passenger compartment via the window -- thanks, Brian -- to my Mityvac. Took the car for a ride. Maxed out at about 11 Mityvac PSI. Still doesn't perform like the two 124 300TDs I drove last week.
[end edit]
By the way, could this spare port on the manifold (see picture) be used for a more permanent installation?
|
Well, that's a good start. 11 psi is right on spec.
Do a 0-60 time with a good stopwatch. Take someone with you to time it.
Report back with results.