Quote:
Originally Posted by High-Test
Will do. I tried again this morning, but got a solid light on all except 2.
Pin 2 flashed five times. Then, I pressed the #3 button again for four seconds, let go, and it flashed five times. maybe that's my culprit.
What does 5 on pin 2 mean?
|
Let me see if I understand. The scan tool has 3 banana plugs. One conected to 1 (ground), one to 16 (12V) and the third conected to port 2? Port 2 must have either a button or an empty hole. There is no circuit asociated to pin 2.
Or does your car have a button on position 2 and a led on position 3? If that's the case and you get code 5 by pressing the button on position 2 (without the scan tool), then the code means "Exaust gas recirculation faulty". If you have this button (on board diagnostics), you only need the tool to read codes for other modules.
Whire harness is very important for that model / year car. Sooner or later it needs to be replaced.
http://www.peachparts.com/shopforum/showthread.php?t=128181
Send me a PM with you e-mail address and I can send you a pdf about analog codes reading.