Quote:
|
Originally Posted by JM van Swaay
Diagnostic module via built in reader: code 6: Idle speed control inoperative
Pin 8, (HFM/SFI): code 8: Idle speed control (ISC) system at upper or lower
control stop
Pin 14, (EA/CC/ISC): code 2: EA/CC/ISC control module (N4/1) or Safety contact switch (M16/1s1) . . . . . . . . . . or safety relay in EA/CC/ISC control module.
|
Tnx for clarifying your post; it didn't read 'right'. . . Pin 14 is "EA" module standing for "Electronic Accelerator" . . .
This is the first case that I know where the CC went bad in the EA module but if it can happen, it's worth posting it.