Quote:
Originally Posted by gmercoleza
If the fan clutch is good, no harm no foul - as I stated above, just approach it very slowly, say 1 inch per hour. The worst that can happen is you will have a LOUD rat-tat-tat sound and you might get a little scared. Obviously you don't want to just jam the broom handle in there...
I have seen fan clutches that rotated freely but were not faulty. Now I didn't sit there and count the number of rotations, but I'm sure they would have spun more than three times. For that matter, the clutch in my E320 currently has plenty of resistance when cold but is easily stopped by a broom handle with the engine running. I just did the test two weeks ago, and yes I am driving with the faulty clutch (I'll replace it eventually).
And what if Mike Tyson is the guy spinning the fan? Or Pee Wee Herman? Too many variables, if you ask me...
|
I only have two thoughts on that.
There are a lot of very novice people who stumble into the forum through search engines - your initial explanation might lead someone astray.
If I took my car to a mech who used that approach to test the fan clutch the car would be in
R quickly.
My original comments were only to prevent someone from being injured