You can buy a bender but they are easily bent by hand using your thumbs to support the tubing as it is bent. You just have to bend the line while your thumbs support the inside of the curve you are bending so that you don't kink it.

Before buying all the lines, I would look at them and see if they are rusty. If they are not rusty there is no reason to replace them. YOu are replacing this because you damaged accidently replacing the rubber line not becasue it is rusty.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.