Quote:
Originally Posted by jkoebel
Check that the wire feeding the glow plug light on the dash, which goes between the glow plug relay and the glow plug light, isn't broken. If it is, fix the break and re-test.
If that wire is good, then proceed with the rest of the tests. That paragraph above suggests that the glow plug relay itself is bad if the wire between the relay and the light is in working order, but that's not necessarily true.
|
The glow plug light in the dash works OK when pin 1 and 3 are jumped. This is the first step on the CD so the contiuity is good, right? I don't understand why in step two it says to check for interruption if in fact I just did, in step one! I must be missing something here.