Camelot, been following your adventures. I bought a 560 SEC about 6 weeks ago so I am going through the same thing. I'm still trying to figure everything out. About the dielectric grease and anti-seize - put the grease on both ends of the wires. It will keep moisture out and it should be easier to take the wires off later. You can put the anti-seize most anywhere that you want - BUT, be sure to put them on the spark plugs. This is especially important with aluminum heads. Steel and aluminum together will cause corrosion. It will make the plugs much easier to remove later on.

Have fun with your car, I am.

__________________
Reed

1987 560 SEC
1980 Triumph Spitfire (drove off the showroom floor) work in progress
1980 Triumph Spitfire (parts car)
1999 Jeep Grand Cherokee (wife's)