Quote:
Originally Posted by jasonkec01
anybody got an idea how i could tighten the round connector ends on the inside of the ovp seat/connector point ? i can push/pull mine in and out fairly easy and about once a week i have to pull it and re-seat it. it doesnt "click" as i've read many people write. in fact,im not even sure if there should be another little "lip" or whatever that would help hold it down.......also,is there ever a time that white smoke should come off of my 02 sensor ? last week i pulled in the garage and in 10 minutes the garage was full of smoke,all of it coming off of the 02 sensor,which has less than 5,000 miles on it..........any help would help ! thanks guys..
|
Why not tell us what year/model you are referring to? If it's the 190 (W201) like in the photo, the connector for the OVP relay is not in a fixed position. If you pull the relay out, you have to support the base/connector to fully seat the relay. Also, if you have someone turn on the ignition, hold the relay with your fingers and you should feel the relay operate.