AJ,

Please read the posts in this thread, I'm sure I mentioned that the MAS control unit controls the fuel pumps. If conditions are right i.e. engine cranking, ingition on (2 seconds), engine running, the MAS unit sends unfused battery voltage to the fuel pumps.

Do the test I mentioned above...also...check for voltage at the connector in R?F foot well.

NOTE * Just because the mass unit is not delivering power to the fuel pumps it is not neccessarily bad. There are signals suppied to the mass unit telling it if and when to power the pumps. The absence of any of these signals will cause the MAS not to activate the pumps. I will get back to you with testing instructions.

Good luck you are on the right track,
Acky