Quote:
Originally Posted by winmutt
I would say 10bar. If you went over 7 and failed to pop the hoses sure would. IIRC 200PSI is the recommended hose.
|
The hose I used has a 300 PSI working pressure. I do not expect the hose to have a problem because of the pressure but out of 70 comments on my replacment of the hose and attaching them with 2 hose clamps on each end of the hose about 1/3 of the people believe the pressure will be too much. But so far no one has said what the pressure is in simple terms. So, I started this thread.