Quote:
Originally Posted by Diesel911
The hose I used has a 300 PSI working pressure. I do not expect the hose to have a problem because of the pressure but out of 70 comments on my replacment of the hose and attaching them with 2 hose clamps on each end of the hose about 1/3 of the people believe the pressure will be too much. But so far no one has said what the pressure is in simple terms. So, I started this thread.
|
Just to be clear, I did not say the pressure was too high, I simply said that I would not trust clamps in that application. It appears the 300 psig is an adequate pressure rating for the hose.