Thread: cold feet!
View Single Post
  #3  
Old 12-04-2007, 11:24 PM
supradupe's Avatar
supradupe supradupe is offline
98 ML320
 
Join Date: Aug 2000
Location: North Shore, IL
Posts: 253
Quote:
Originally Posted by maverick40 View Post
i have a ML 320 99 and is working pretty good till now.i have a problem with the blower wich blows air at the feet, the lower part.is a diferent blower or is the same , because for the windshield and front and lateral it blows correctly at every speed 1,2,3, and 4 .
so... is a diferent blower or just some of the ducts are stucked or closed??
any ideas???
thank you
There is an updated air guide that replaces the original one at the driver's footwell. approx $30 and a snap to change. Alternatively, you can pull that air guide out and wrap one or two of the big holes with duck tape. this will increase the back pressure and produce more forceful air blow down to your foot. See pic below and cover the redlined holes with duck tape or HVAC tapes.
Attached Thumbnails
cold feet!-air-guide.jpg  
__________________
98 ML320 (gone but not forgotten)

Last edited by supradupe; 12-04-2007 at 11:31 PM.
Reply With Quote