|
I just use my multimeter to test the Spark plug wire & set the ohmmeter to 2000. This is the readinfg I got. Lead number 1=1, 2=1762, 3=varied & not holding, 4=1795. This seems to confirm wire number 1 & 3 must be back. I tried this several times including with the Spark Plug connected to the leads. I get simmilar results. So it seems nothing wrong with the coils. But how do i replace the copper beru wires, it look difficult to remove the rubbers surrounding the connectors.
There is a slight tear on the rubber, wondering if this is OK?
|