[QUOTE=Arthur Dalton;1710320]Ok

you have a problem in either the wires from the sensor plug to the N22 module or a bad N22 ."

OK, Where is the N22 Module and is it difficult to replace?

You mentioned that you had changed that plug ..WHY was that..did you have bad insulation at that harness?????

Plug had "melted" according to mechanic. harness looks to be in pretty good shape.


The x26 plug is around that fuse box somewhere and that is just a plug in the harness that is between the sensor and the module for firewall disconnect. can you tell/show me what this plug might look like?


Your sensors values are Ok , but your N22 module is triggering early.
The sensor feed at N22 is pin #8...you should have perfect cont [ trace ohms]between that pin and one side of the sensor....

I'll try this, once I find the N22 module


Thanks again for your help!

__________________
RJ
'92 500E
'75 Triumph TR 6