1st search archives for "door panal removal."
Here is a list.
On the edges of the panel you have three chrome protectors. Remove them with phillips screw driver.
Then if there is a locking knob remove it.If not there is a latch with a phillips screw behing it remove it.
Then there is the door latch opener.There is a black plactic cover behind latch. Take pocket knife and pry out each edge and remove it. There is a phillips screw remove it.
On driverside the arm rest has two large phillips screw remove them. On passenger side there are three. Remove the bottom two and then you will loosen the panel and get last one.
Now with a tool or kitchen case knife pry up panel from edges starting at a bottom corner.You will do this all across the bottom and both sides. Not the top!
With panel loose on bottom and sides remove last screw on passanger side arm rest.Then lift out the bottom and pull upward.The top is secured with clamps.
These are little pieces of bent metal. They will release sometime with help. Make sure that the plastic sheet is between door and door panel. If it is missing replace with a trash bag and trim. This is a moister barrier. that keep the masonite dry when it rains. Charlie