I changed the OVP and FRP myself a few months ago.

Here is the paperwork I got back:
Replaced wires
Replaced plugs
Replaced dist cap
Replaced rotar
Replaced air flow meter (adjusted potentiometer)
Tested Fuel Pressure (system 80 psi, L/chamber 75 psi
Tested EHA current 20 ma key-on, 2-5 ma @idle, fluctuates w/accel-decel
Tested Lambda Control - good occilates
Tested Temp Sensor - 2.94 52@ 70F
Tested Fuel Volume - Good
Tested Fuel Sample - Good
Tested Both Fuel Pumps - Running
Tested Exhaust Back Pressure - OPSI @idle & 3000RPM
Tested Temp Sensor - Good
Tested O2 Sendor - Good, but is lazy EHA

Didn't check Fuel distributor or for vacuum leaks.