Quote:
Originally Posted by rishoreguy
I have an 87 300e and have the two issues.
1. The passanger power seat adjustment is parially broken (tilt works but back adjustment is not functioning). Does anyone know how I can over ride this and set it in a spot so I do not have to replace it right now? I just need to move the seat back about 8 inches.
2. The power window in the back works going down but sporatically going up. Suggestions?
Thanks!
|
If it's not the motor(some seats have three)or the door switch, then try this to see if your problem in in the wiring. Ignition on so you have power to your accessories. Stand outside and push the switch to activate the seat motion you say does not work. While doing this move the door open or close as much as you can to see if the seat tries to work. If it does, then the wires in the harness going from the door to the chassis of the car have severed. Or or freyed.