Quote:
Originally Posted by t walgamuth
If it is not too rusty, you clamp onto the u shaped bracket with a vice grip and pull away and twist 90 degrees. Then (theoretically) it should come out. YOu may have to wiggle it back and forth to get it out. It is a snug fit.
Tom W
|
As Tom said, I have also noticed there are "lands" on the bottom of the ornament, which that bracket is supposed to rest on when in the released position, but the bracket tends to expand and wants to fall alongside the lands, and needs to be squeezed to make it rest on them as you release your hold. If you get them landed right it usually just falls right out. Grab with channelocks or vise grips, pull & twist, hold pulled and squeeze bracket, release pull gently making sure both sides of bracket land properly. -Plop!-