PeachParts Mercedes-Benz Forum - View Single Post - How can you tell if wheel bearings are going bad?

bobs · #9 01-28-2008, 07:10 PM

Update: I replaced the front shocks this evening, and I think the prize goes to Hatterasguy & kestas.: Once I got the wheels off, the bearings felt fine, but the lower control arm bushings looked suspect. While they weren't totally shot, they definitely showed wear and some cracking.

I didn't get a chance to properly inspect/repack the bearings due to time constraints, but I'm pretty sure I've got some miles left before I have to do them.

The shock replacement was ridiculously easy and made a HUGE difference in ride quality. I think I'm going to do the rears next payday.

I still have the hum/thrum when I drive at freeway speed but its no longer buzzing the steering wheel like before. I'm becoming more convinced that it has to do with the POS Michelin tires the PO had installed. I see a set of Contis coming my way in the not too distant future.

Thanks again for everyone's help and input. This forum is the best!