Gentlemen,
You guys are truly the greatest. The spirit of this board is to help each other, and you guys have proven to be; giving of your time, responsive, and knowledgeable. I appreciate all the information, even bits and pieces, because its all a part of this puzzle for me.
Mpolli, you were the first to chime in and I appreciate the thoughts, and I can see that you got my back so thanks. Raymond, the schematic was great, I didn’t have it, and it helped greatly with my basic understanding of the problem at hand and the wiring in general. Bhatt, I wish I could hook up the battery again, but the engine is gone, all relays, fuses, etc. Bhatt, you did hit on a solution that was echoed by another member that I got a message from, to get to the source of the 12V power for the seats, and jump directly with a battery and a ground to the chassis. I have been told that there is a connector under the dead pedal (foot rest) on the driver’s side of the car that I can apply the 12V to and hopefully move the seats with the switch. I just can’t seem to get the time to get out to the garage to get it done. I am going to try it again tonight. I’ll let you guys know.
Thanks Again!