I finished replacing the conductor plate in the tranny today.
Removed 1.3gal fluid,(way more than the 3-4L expected), only refilled with 4L, thats all I had on hand.

Old fluid was dirty with particles and few micro specs of metal, but nothing serious, just incredibly dirty.

After re-installing everything, I started it up, shifted into D (which was noticebly smoother already), and slid slowly out of the garage. I stopped to back up and Reverse, and no go. Then back to D, no go again. There was no engagement by the tranny into any gear, nor was there a clunk when doing so.

So, it seems to me that the valve body isnt engaging, its electrical, or an acuator. My tranny electrical connector did have a little oil in it, but it wasnt flooded, I cleaned it thoroughly before reinstalling..

Any ideas would be great right now!!

Thanks,
Chris