Originally Posted by BodhiBenz1987

Not sure if these are of any use ...
-Picture at left shows where the arm bolts to the roof panel ... you can see in the photo I have the front bolt removed.
-Middle pic shows where the arm bolts to the transport bridge
-Last pic is a BROKEN arm ... the arrows point to the breaks. You can see the large flat area of the arm that connects to the transport bridge, to the right of the mechanism ... you can see the portion that bolts to the roof panel lying at the top of the photo, broken from the mechanism (it's supposed to be connected where the right yellow arrow is). The arm orients in the car with the large, flat section connecting to the transport bridge toward the rear of the car (and pointing inward, as you can see in the second pic). You can see the sliding shoes in this photo, one to the left (at the front of the mechanism) and one right under the transport bridge connection. Those will go in the sliding rails.

I wish I'd taken better pictures, but this was such a huge project for me and I was more focused on getting it done right. If I ever do it again (hopefully I won't have to!) I'll take better photos.