I removed the valve cover successfully. And yes I did need to remove the vac hose at the power brake and it was still difficult to get off. Anyway, the Cam Oiler Tube just fell out. Basically it was just sitting there and not really attached with the plastic connections. My guess is that the plastic connections should be holding this tube in place am I right? I guess I need to purchase new plastic connections and gaskets for both sides. Do you really think this could be the problem? And is there anything else I should be checking for while I have these covers off?

The cam (on the driver's side anyway) looks good. The lobes do not show much wear which is a good sign.

Thanks a million for all your help here,
-Tony-