Yes and its a tough job

At the cylindrical base of the connector housing (black plastic) there is a hole in which the facory injected hot plastic to seal the wires into the housing. This effectively locked the inner white plastic piece agaist the outer blact housing.

I completely rebuilt my harness and this connector was a bear to pull apart. I was unable to salvage the wires doing it. I plan on a junkyard dive to acquire at least two 11 X 4 (44) pin connectors to basically canabalize to rebuild one good one replacing my existing piece.

You can cut a window into the black housing and perhaps get limited access to the wire from above. Unfortunately its VERY busy inside that housing.

One alternative is to determine which pin that wire is and with a needle nose plier see if you can pull it outward to get a little more life out of it.

Hope that helps.

__________________
Brian G.

1994 E320 Wagon with many warts SOLD
1995 E320 Wagon with a beauty mark or two FOR SALE