Quote:
Originally posted by DanielW
I don't know if it would have been different on each model.
Does that spacer and wheel bearing have to be replaced on my model/year too? I have to talk to the repair shop on Friday. Any info would be appreciated.
DanielW
|
Daniel
The set up is the same. The spacer can only be used once. Make sure it is done by someone who knows about Mercs hubs, as if the hub nut is overtighten the spacer squashes and is not good slacking the nut then, the hub would have too much end ply.
The bearings have to be extracted from the hub (racers) and the flange. Wouldnt advise to reuse them afterwards!.
regards