I got this from using the search, from Gilleybenztech...


As of M.Y. 1990 version Becker radios
Recoding sequence:
1. Turn ignition key to position 2.
2. Turn radio on. "CODE" appears on the display.
3. Enter the fist digit of anti-theft code from CODE card.
"CODE" will disappear and the entered digit will flash
on the display panel.
4. Enter the remaining three digits (total of four digits).
If a wrong digit was entered, turn the radio off and then on,
CODE will reappear on the display, then continue with step 3.
5. When all the digits have been correctly entered the radio
operation resumes.

If unsuccessful:
6. If WAIT appears on panel, the radio must be left ON until CODE
appears. This may take either 15 minutes (if WAIT is flashing)
or 24 hours (if WAIT is not flashing).
7. Once CODE appears, continue with step 3.


Good luck,
Tom

__________________
RIP "Betsy" (Oo=*=oO)
'96 E 3 2 0 (W 2 1 0) M 1 0 4 (Totalled)
Spaces in sig so as not to screw up the SEARCH; every time someone searches for that MB they don't want my sig!

2004 Audi A8L
'98 VW Passat 1.8T 5M
'87 Alfa Romeo Milano 2.5L 5M
'67 Impala convertible, 327cid