We take out the sector and use a torqueometer that measures in very small amounts.(in lbs) This device allows the measurement of rotational force. The static force for the unloaded piston is usually about 3-5in/lbs. When you start adjusting for the output shaft, you will set it to about 12-15in/lbs in the center of its travel.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM




[This message has been edited by Benzmac (edited 06-14-99).]