View Single Post
  #4  
Old 03-07-2008, 01:04 AM
Richard Wooldridge Richard Wooldridge is offline
Registered User
 
Join Date: Dec 2000
Location: Battle Ground, WA
Posts: 576
Keep in mind that the lower bolt on the steering coupler must be completely removed as it locks the shaft in place when its through the hole, due to a depressed area in the spline. Also, the upper bolt on the steering coupler is very easy to access by lifting the cover inside the cabin area, contrary to the information Mr. Bryce gave. If you only need to replace the coupler, it can be done from inside the cabin without removing the steering box in about 2 hrs max.
__________________
Richard Wooldridge
'01 ML320
'82 300D 4.3L V6/T700R4 conversion
'82 380SL, '86 560SL engine/trans. installed
'79 450SL, digital servo update
'75 280C
Reply With Quote