Quote:
Originally Posted by Carson357
it is possible someone may have bridged the switch on the receiver dryer
|
If he disconnected the relays, jumping the drier sw would not give him a fan.
..But , he may not have the correct relays or someone may have jumpered to the Resistor..
Is the Poster aware of the relay locations and that there are two seperate relays???
If the relay for high fan is in place and you disconnected the blu sensor, you will get a fan by Default at ANY temp. [ but that relay has to be in it's socket]
Same condition if that sensor is OPEN.
If you do see someone has done a fan jumper, look under the dash for a possible switch..that is a common mod guys do on these.