Quote:
Originally Posted by highwater
I have a 99 E430 as well and just replaced the front rotors and pads. Now I have a vibration in the steering wheel anytime I apply the brakes. Would appreciate any suggestions as what might be causing this. Thanks......Highwater
|
I would first check the rotors for runout. Remove the caliper, place something stationary up against the edge of the rotor, spin it and see if it is running true.
If I found one that was out of round I would try removing the rotor and cleaning the hub and back of the rotor. There may be some debris on the mating surface. If not, you simply have a bad rotor.
If I couldn't detect a rotor that was not spinning true, I would try cleaning both hubs. If the problem is still there... Replace the rotors again...
Good luck!